User manual TYAN TIGER I7501

[. . . ] Tiger i7501 /// Revision 1. 02 S2723 Copyright © TYAN Computer Corporation, 2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Intel, Xeon, and combinations thereof are trademarks of Intel Corporation. [. . . ] CPU Configuration North Bridge ICH3 South Bridge Intel PCI-64 Hub 2 All settings discussed in following sections. 33 http://www. TYAN. com 3. 12 ­ CPU Configuration Options related to the CPU chipset settings can be altered through the following. CPU Ratio Status Unlocked 20 Auto detects CPU speed. It is recommended to leave as default (255), because changing CPU ratios may render your system inoperable. If an invalid ratio is set in CMOS then actual and setpoint values may differ. To m odify, hit backspace and type new ratio. CPU Ratio Actual Value CPU Ratio CMOS Setting 255 Hyper-Threading Enable This setting allows you to take advantage of Hyper-Threading enabled Xeon processors. Enabling Hyper-Threading allows a compatible Xeon processor to process applications that are written for a multi-processor system even if you are using only one Xeon processor. 3. 13 ­ ICH3 Chipset Configuration Please leave all options in this section at their default setting because they are crucial to the stability of the system. ICH3 Dev31 Func1, IDE ICH3 Dev31 Func3, S MBUS ICH3 Dev29 Func0, USB#1 ICH3 Dev29 Func1, USB#2 ICH3 Dev29 Func2, USB#3 LPC 2Eh-2Fh Decode [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] Controls IDE On/Off Controls SMBUS On/Off Enables external USB ports Enables internal USB 2 Enables internal US B 3 LPC 2Eh-2Fh Decode Super I/O address. Leave as default. IOAPIC IOAPIC 34 http://www. TYAN. com (ICH3 Chipset Configuration continued) DMA-0 Type [LPC DMA] DMA-1 Type [LPC DMA] DMA-2 Type [LPC DMA] DMA-3 Type [LPC DMA] DMA-4 Type [LPC DMA] DMA-5 Type [LPC DMA] DMA-6 Type [LPC DMA] DMA-7 Type [LPC DMA] 3. 14 ­ Intel PCI-64 Hub 2 Chipset Configuration Options related to the Intel PCI-64 hub and its settings can be altered through the following. I/O Port Decode RAS Sticky Error Handling IOAPIC Support in MP Table VGA Decode This option allows you to adjust the decode size of the I/O ports. This option allows you to define how RAS errors are handled and whether they are corrected or left as is. This option allows you to adjust settings for IOAPIC functions that relate to multi-processor handling. Please leave this option at its default setting. 3. 15 ­ ACPI Options related to power management settings can be altered through the following options. ACPI Aware O/S ACPI Advanced Yes No Defines whether the OS can manage IRQs, DMAs, and other system settings on its own. All settings discussed in following sections 3. 16 ­ ACPI Advanced Options related to advanced power management settings interface can be altered through the following options. This option allows you to define whether or not to enable ACPI management features. BIOS à AML ACPI Stable Please leave this option at its default setting. Headless Mode Enable Disable After Power Fail Allows system to reboot after a power failure. Previous State Enabled Power button instant off Disabled Choose between instant on/off or a 4 second delay. Enable Do not enable unless you are familiar with this Watchdog Timer Disable feature Enabled Enables Wake On Lan support. (Only on 82551 WOL S1 & S5 Disabled NIC. ) ACPI APIC Support 35 http://www. TYAN. com 3. 17 ­ Boot Options related to boot devices can be altered through the following. These can be 2nd Boot Device customized depending on your 3rd Boot Device preference. Enabled/Disabled Boot Device Priority Hard Disk Drives Removable Devices ATAPI CDROM Drives Interrupt 19 Capture 3. 18 ­ Security Options related system security can be altered through the following. Change Supervisor Password Change User Password Clear User Password Boot Sector Virus Protection Changes system password. Enabled Toggles protection of boot sector on the hard drive Disabled from being modified. 3. 19 ­ Exit Options related exiting and saving can be done using the following. [. . . ] Backed by QLogic's ARM7 technology, IT manager can rest assure his server machines are always taken care. Unlike regular peripheral card such as AGP card, Network card or SCSI card, SMDC does not require any hardware specific driver. As long as a standby power comes into the system, SMDC will begin looking after the system. Tyan SMDC provides diversified methods to communicate with the hardware. [. . . ]