User manual TYAN TIGER I7501X

[. . . ] Tiger i7501X /// Revision 1. 03 S3022 Copyright © TYAN Computer Corporation, 2003. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Intel, Xeon, and combinations thereof are trademarks of Intel Corporation. [. . . ] Press to view event log statistics. Select Remote Access Type 3. 10 ­ USB Configuration Options related to USB can be altered through the following. USB Function Legacy USB Support USB Zip Emulation Type USB Beep Message 3. 11 ­ Hardware Monitor Hardware Monitor Reports CPU temperatures, voltage, and fan speeds. Enabled Disabled Enabled Disabled Auto Enabled Disabled Auto Enabled Disabled Toggles the onboard USB ports. Toggles USB beep error messaging. 3. 12 ­ Onboard Device Configuration Options related to onboard devices can be altered through the following. Onboard SCSI Onboard ATI Video Onboard 82551 LAN Onboard Gigabit LAN Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Toggles LSI 1030 Onboard SCSI. Toggles the 1Gbit LAN port. 3. 13 ­ PCIPnP Options related to the Plug and Play PCI settings interface can be altered through the following. Plug & Play OS PCI Latency Timer Allocate IRQ to PCI VGA Palette Snooping PCI IDE BusMaster Offboard PCI/ISA IDE Card Yes No 32, 64, 96, 128, 160, 192, 224, 248 Yes No Enabled Disabled Enabled Disabled Auto Toggles the option of letting the OS take care of IRQ routing or the BIOS. Palette Snooping can fix color problems associated with non-standard video cards such as MPEG decoders. Enables the system to recognize and boot 31 http://www. TYAN. com IRQ 3, 4, 5, 7, 9, 10, 11, 14, 15 DMA Channel 0, 1, 3, 5, 6, 7 Reserved Memory Size PCI Slot 1, 2, 3, 4, 5, 6 from an add-in IDE controller card. These settings enable you to set which IRQs will be reserved for other devices other than the ones that use them by default. These settings enable DMA channel 0 and 1 to be available or reserved. Disabled 16K 32K 64K Size of memory block to reserve for legacy ISA devices 3. 14 ­ Boot Options related to the Boot settings interface can be altered through the following. Quick Boot Quiet Boot Add-On Rom Display Mode Boot up Num-Lock PS/2 Mouse Support Typematic Rate System Keyboard Parity Check Boot To OS/2 Wait for `F1' if error Hit "Del" Message Display Interrupt 19 Capture Enabled Disabled Enabled Disabled Force BIOS Keep Current On Off Enabled Disabled Fast Slow Present Unavailable Enabled Disabled No Yes Enabled Disabled Enabled Disabled Enabled Disabled When set to Enabled, some self-tests will be skipped during POST. If set to Enabled, OEM logo will be displayed instead of POST messages. OS/2 Compatibility mode If Enabled, you will have to press F1 for the system to continue booting if an error is detected during POST. Please refer to your SCSI card's documentation. Boot Device Priority Hard Disk Drives Removable Devices 1st Boot Device Settings for boot priority. These can be 2nd Boot Device customized depending on your 3rd Boot Device preference. This option will show all removable devices. 3. 15 ­ Chipset Options related to the chipset can be altered through the following. Intel E7500/7501 North Bridge configuration Intel ICH3 South Bridge Configuration Intel PCI-64 Hub 2 Configuration All settings discussed in following sections. 32 http://www. TYAN. com Spread Spectrum Settings CAS Latency Disabled Enabled Auto 2 2. 5 3. 16 ­ Intel ICH3 South Bridge Configuration Please leave all options in this section at their default setting because they are crucial to the stability of the system. ICH3 Dev31 Func1, IDE ICH3 Dev31 Func3, SMBUS ICH3 Dev29 Func0, USB#1 ICH3 Dev29 Func1, USB#2 ICH3 Dev29 Func2, USB#3 [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] [Enabled] [Disabled] Controls IDE On/Off Controls SMBUS On/Off Enables external USB 1 Enables internal USB 2 Enables internal USB 3 Super I/O address. Leave as default. LPC 2Eh-2Fh Decode IOAPIC Extended IOAPIC (ICH3 Chipset Configuration continued) DMA-0 Type [LPC DMA] DMA-1 Type [LPC DMA] DMA-2 Type [LPC DMA] DMA-3 Type [LPC DMA] DMA-4 Type [LPC DMA] DMA-5 Type [LPC DMA] DMA-6 Type [LPC DMA] DMA-7 Type [LPC DMA] 3. 17 ­ Intel PCI-64 Hub 2 Chipset Configuration Options related to the Intel PCI-64 hub and its settings can be altered through the following. HotPlug Inhibit Bus Connect PCI Bus Frequency Enabled Disabled Auto 33, 66, 100, 133Mhz 3. 18 ­ Intel E7500/7501 North Bridge configuration Options related to the Intel E7500/7501 North Bridge and its settings can be altered through the following. Chipset Memory Remap Feature Enabled Disabled Leave this option at default setting 33 http://www. TYAN. com 3. 19 ­ Security Options related system security can be altered through the following. [. . . ] BMC is a standalone mini-CPU and runs on its own Real Time Operating System (RTOS) to complete all different kinds of tasks. Backed by QLogic's ARM7 technology, IT manager can rest assure his server machines are always taken care. Unlike regular peripheral card such as AGP card, Network card or SCSI card, SMDC does not require any hardware specific driver. As long as a standby power comes into the system, SMDC will begin looking after the system. [. . . ]