User manual TYAN TOLEDO I3010W

[. . . ] Toledo i3010W /// Version 1. 00 S5197 Copyright Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. Trademark All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. Intel, Prescott, and combinations thereof are trademarks of Intel Corporation. IBM, PC, AT, and PS/2 are trademarks of IBM Corporation. Notice Information contained in this document is furnished by TYAN Computer Corporation and has been reviewed for accuracy and reliability prior to printing. [. . . ] Hyper-Threading Technology is a form of simultaneous multi-threading technology (SMT) where multiple threads of software applications can be run simultaneously on one processor. This is achieved by duplicating the architectural state on each processor, while sharing one set of processor execution resources. Hyper-Threading Technology also delivers faster response times for multi-tasking 49 http://www. tyan. com workload environments. By allowing the processor to use on-die resources that would otherwise have been idle, Hyper-Threading Technology provides a performance boost on multi-threading and multi-tasking operations for the Intel NetBurst® microarchitecture. Options: Enabled / Disabled Set Max Ext CPUID = 3 Sets Max CPUID extended function value to 3. Options: Disabled / Enabled Numbers of Step Grant This feature is used to configure the numbers of Step Grant. Options: Per Core / Single C1 Enhanced Mode This feature is used to enable the C1 Enhanced mode. Options: Enabled / Disabled Intel ® Virtualization Technology Intel Virtualization Technology is a set of platform features that support virtualization of platform hardware and multiple software environments. Options: Disabled / Enabled No Execute Mode Protection This feature is used to enable the function of No Execute Mode Protection. Options: Enabled / Disabled Processor Power Management Thermal Management throttles the processor back as it reaches its maximum operating temperature. Throttling reduces the number of processing cycles, thereby diminishing the heat dissipation of the CPU. Once the CPU has reached a safe operating temperature, thermal throttling is automatically disabled, and normal full speed processing begins again. Options: GV1/GV3 only / Disabled 50 http://www. tyan. com 3. 4. 3 I/O Device Configuration This setting allows you to configure I/O devices. PhoenixBIOS Setup Utility Advanced I/O Device Configuration Serial port A: Base I/O address: Interrupt: Serial port B: Base I/O address: Interrupt: Parallel port: Mode: Base I/O address: Interrupt: Floppy disk controller: [Enabled] [3F8] [IRQ 4] [Enabled] [2F8] [IRQ 3] [Enabled] [Bi-directional] [378] [IRQ 7] [Enabled] Item Specific Help Configure serial port A using options: [Disabled] No configuration [Enabled] User Configuration [Auto] BIOS or OS chooses configuration (OS Controlled) Displayed when controlled by OS F1 Help Esc Exit Select Item Select Menu -/+ Change Values F9 Setup Defaults Enter Select Sub-Menu F10 Save and Exit Serial Port A/B: This defines how the serial port A/B is detected and configured. Options: Disabled / Enabled Base I/O Address: Set the base I/O address for serial port A/B. Options: 3F8 / 2F8 / 3E8 / 2E8 Interrupt: Set the interrupt for serial port A/B. Options: IRQ3 / IRQ4 Parallel Port This defines how the parallel port is detected and configured. Options: Disabled / Enabled Mode This field allows the user to select the parallel port mode. The default value is Standard that automatically selects the correct mode to use. The other modes are explained as follows: SPP works with all parallel port devices. However, it is the slowest transfer mode and should only be used when faster transfer modes cannot be used. 51 http://www. tyan. com There are two faster bidirectional modes available - the ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes. For those who don't know what mode to select but at least know that their parallel port device supports bidirectional transfers, the BIOS offers the ECP+EPP mode. [. . . ] This shift the processor over and down, guiding into the board and locking it into place. 75 http://www. tyan. com NOTE 76 http://www. tyan. com Technical Support If a problem arises with your system, you should first turn to your dealer for direct support. Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, take the system to them directly to have it serviced instead of attempting to do so yourself (which can have expensive consequences). If these options are not available for you then Tyan Computer Corporation can help. [. . . ]