User manual TYAN TOMCAT H1000S

[. . . ] Tomcat H1000S /// Revision 1. 00 S3950 Copyright © TYAN Computer Corporation, 2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Tomcat H1000S (S3950) are trademarks of TYAN Computer Corporation. AMD, AMD Opteron, and combinations thereof, are trademarks of Advanced Micro Devices, Inc. [. . . ] Main Advanced BIOS Setup Utility PCI/PnP Boot Exit Security Chipset Configure ServerWorks Enable HT1000 S-ATA. [Enabled] [P-ATA] [Enabled] Select Screen Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit HT1000 S-ATA S-ATA Mode INT13 Support Feature Configure ServerWorks HT1000 S-ATA Option Enabled Disabled P-ATA Description Allows user to enable or disable HT1000 S-ATA controller. S-ATA Mode S-ATA S-ATA RAID Enabled Sets S-ATA mode as P-ATA emulation native S-ATA, or S-ATA RAID. INT13 Support Disabled Enables or disables INT13 support. 46 http://www. tyan. com 3. 5. 6 ­ACPI Configuration Sub-Menu Use this screen to select options for ACPI. Use the Plus and Minus (+/-) keys to change the value of the selected option. A description of the selected item appears on the right side of the screen. Main Advanced BIOS Setup Utility PCI/PnP Boot Exit Security Chipset Advanced ACPI Configuration ACPI Version Features ACPI APIC Support ACPI SRAT Table AMI OEMB table Headless mode [ACPI v2. 0] [Enabled] [Enabled] [Enabled] [Disabled] Enable RSDP pointers to 64-bit Fixed System Description Tables. Di ACPI version has some Select Screen Select Item +/Change Option F1 General Help F10 Save and Exit ESC Exit Feature Advanced ACPI Configuration ACPI Version Features Option ACPI v1. 0 ACPI v2. 0 ACPI v3. 0 Description Set this value to allow or prevent the system to be complaint with the ACPI 2. 0 specification. This option allows you to define whether or not to enable APIC features. Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root System Description Table (RSDT) table. Note: OEMB table is used to pass POST data to the AMI code during ACPI O/S operations. Enable or disable Headless operation mode through ACPI. ACPI APIC Support Enabled Disabled ACPI SRAT Table Enabled Disabled Enabled AMI OEMB table Disabled Enabled Disabled Headless mode 47 http://www. tyan. com 3. 5. 7 ­ Event Logging details Sub-Menu You can use this screen to view the Event Log Control Menu. This logs system events (such as CMOS clear, ECC memory errors, etc) and writes the log into NVRAM. Use the Plus and Minus (+/-) keys to change the value of the selected option. BIOS Setup Utility PCI/PnP Boot Exit Main Advanced Security Chipset Event Logging details View all unread events on the Event Log. Select Screen Select Item +/Change Option Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit View Event Log Mark All Events as Read Clear Event Log Event Log Statistics Feature Event Logging details View Event Log Mark All Events as Read Clear Event Log Option Description Views all unread events on the Event Log. (in terms of event units) OK Cancel OK Cancel Event Log Statistics 48 http://www. tyan. com 3. 5. 8 ­ Hardware Health Configuration Sub-Menu You can use this screen to view the Hardware Health Configuration Settings. Use the Plus and Minus (+/-) keys to change the value of the selected option. Main Advanced BIOS Setup Utility PCI/PnP Boot Exit Security Chipset Hardware Health Configuration Enables Hardware Health Monitoring Device. [Enabled] [4Pin FAN] [Disabled] H/W Health Function FAN Select FAN Power Control Hardware Health Event Monitoring Mainboard Voltages Report CPU Temperature VRM Temperature System Temperature FAN1 Speed FAN2 Speed FAN3 Speed FAN4 Speed FAN5 Speed FAN6 Speed FAN7 Speed :xx C/ xxx F :xx C/ xxx F :xx C/ xxx F :xxxx RPM :xxxx RPM :xxxx RPM :xxxx RPM :xxxx RPM :xxxx RPM :xxxx RPM Select Screen Select Item +/Change Option Tab Select Field F1 General Help F10 Save and Exit ESC Exit Feature Option Description Enables Hardware Health Monitoring Device. Hardware Health Configuration Enabled H/W Health Function Disabled FAN Select 4Pin FAN 3Pin FAN Enabled FAN Power Control Disabled FAN power duty cycle is auto dynamic programmed in selected temperature range. Enabled: Fan Power Duty Cycle=30%(40°C)100%(60°C), see mainboard temp. 49 Selects the FAN type. http://www. tyan. com Feature Hardware Health Event Monitoring Mainboard Voltages Report CPU Temperature VRM Temperature Option Description Displays Voltage for CPU, memory, & other devices. Displays CPU Temperature and FAN Speed. Read only Read only System Temperature FAN1/2/3/4/5/6/7 Speed 50 http://www. tyan. com 3. 5. 8. 1 ­ Mainboard Voltages Report Sub-Menu BIOS Setup Utility PCI/PnP Boot Main Advanced Security Chipset Exit Board Voltages Report Select Screen Select Item +/Change Option Tab Select Field F1 General Help F10 Save and Exit ESC Exit +2. 5V CPU Vcore +5V +12V : x. xxx V : x. xxx V : x. xxx V : x. xxx V 51 http://www. tyan. com 3. 5. 9 MPS Configuration Sub-Menu You can use this screen to select MPS revision. Main Advanced BIOS Setup Utility PCI/PnP Boot Exit Security Chipset MPS Configuration Select MPS Revision. [. . . ] ZCR (Zero Channel RAID): PCI card that allows a RAID card to use the onboard SCSI chip, thus lowering cost of RAID solution ZIF Socket (Zero Insertion Force socket): these sockets make it possible to insert CPUs without damaging the sensitive CPU pins. The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding it into the board and locking it into place. 80 http://www. TYAN. com Technical Support If a problem arises with your system, you should first turn to your dealer for direct support. Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. [. . . ]