User manual TYAN TOMCAT I845

[. . . ] Tomcat K7M /// Revision 1. 02 S2498 Copyright © TYAN Computer Corporation, 2005-2006. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are the properties of their respective owners, including, but not limited to the following. AMD, Geode and the combinations thereof are trademarks of AMD Corporation. [. . . ] Enabled / Disabled Onboard Serial Port 1 / 2: Select an address and corresponding interrupt for the first and second serial ports. 3F8/IRQ4 / 2E8/IRQ3 / 3E8/IRQ4 / 2F8/IRQ3 / Disabled / Auto UART Mode Select: This field allows the users to configure what IR mode the 2nd serial port should use. Normal / IrDA and ASKIR RxD, TxD Active: This field configures the receive and transmit signals generated from the IR port. Hi, Hi / Hi, Lo / Lo, Hi / Lo, Lo IR Transmission Delay: This item allows you to "Enabled" or Disabled" the IR transmission delay. Enabled / Disabled UR2 Duplex Mode: This item allows you to select IR "Half" or "Full" duplex function. Half / Full 42 http://www. TYAN. com Use IR Pins: This item allows the user to configure the IR Pins: IR-Rx2Tx2 . Onboard Parallel Port: This field allows the user to configure the LPT port. 378/IRQ7 / 278/IRQ5 / 3BC/IRQ7 / Disabled Parallel Port Mode: This field allows the user to select the parallel port mode. SPP / EPP / ECP / ECP+EPP/ Normal EPP Mode Select: This item allows you to determine the IR transfer mode of onboard I/O chip. EPP1. 9 / EPP1. 7 ECP Mode Use DMA: This field allows the user to select the DMA1 or DMA3 for the ECP mode. 1/3 43 http://www. TYAN. com 3. 6 ­ Power Management Setup Options related to power management can be altered through the following: Phoenix ­ AwardBIOS CMOS Setup Utility Power Management Setup ACPI Function ACPI Suspend Type Power Management Option HDD Power Down Suspend Mode Video Off Option Video Off Method MODEN Use IRQ Soft-Off by PWRBTN Run VGABOIS if S3 Resume Ac Loss Auto Restart IRQ/Event Activity Detect [Enabled] [S1 (POS)] [User Define] [Disabled] [Disabled] [Suspent -> Off] [V/H SYNC+Blank] [3] [Instand-Off] [Auto] [Off] [Press Enter] Item Help _________________________ Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults ACPI Function: Toggles advanced power and configuration done by OS. Enabled / Disabled ACPI Suspend Type: Defines ACPI system suspend mode. S1 (POS)/ S3 (STR)/ S1&S3 Power Management Option: Defines the type of power saving features the system should follow. User Define / Maximum Saving / Minimum Saving HDD Power Down: Defines hard drive power down delay. Disabled / 1 min-15 min Suspend Mode: Defines the method used to power off the system. Disabled / 1 Min / 2 Min / 4 Min / 6 Min / 8 Min / 10 Min / 20 Min / 30Min / 40Min / 1 Hour Video Off Method: Defines the method used to power off graphics. V/H SYNC+Blank / Blank / DPMS Video Off Option: Tell you what time frame that the video will be disabled under current power management settings. Always On / Suspend -> Off 44 http://www. TYAN. com MODEM Use IRQ: Name the interrupt request (IRQ) line assigned to the modem (if any) on your system. NA / 3 / 4 / 5 / 7 / 9 / 10 / 11 Soft-Off by PWRBTN: Defines the mode of the Soft-Off by PWRBTN. Delay 4 Sec /Instant-Off Run VGABOIS if S3 Resume: Defines the type used to run VGABOIS if S3 Resume. Auto / Yes / No Ac Loss Auto Restart: Defines the type of the Ac Loss Auto Restart. Off / On Phoenix ­ AwardBIOS CMOS Setup Utility IRQ/Event Activity Detect PS2KB Wakeup Select PS2KB Wakeup From S3/S4/S5 PS2MS Wakeup from S3/S4/S5 USB Resume from S3 VGA LPT & COM HDD & FDD PCI Master PowerOn by PCI Card Modem Ring Resume RTC Alarm Resume Date (of Month) Resume Time (hh:mm:ss) IRQs Activity Monitoring [Hot Key] [Disabled] [Disabled] [Disabled] [OFF] [LPT/COM] [ON] [OFF] [Disabled] [Disabled] [Disabled] 0 0: 0: 0 [Press Enter] Item Help _________________________ Menu Level : Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults PS2KB Wakeup Select: When Select password, Please press ENTER key to change Password Max 8 numbers. [. . . ] The CPU is lightly placed in an open ZIF socket, and a lever is pulled down. This shifts the processor over and down, guiding into the board and locking it into place. 60 http://www. TYAN. com Technical Support If a problem arises with your system, you should first turn to your dealer for direct support. Your system has most likely been configured or designed by them and they should have the best idea of what hardware and software your system contains. Furthermore, if you purchased your system from a dealer near you, take the system to them directly to have it serviced instead of attempting to do so yourself (which can have expensive consequences). [. . . ]