User manual TYAN TRINITY I845DDR

[. . . ] Trinity i845DDR S2095 Revision 1. 00 Copyright © TYAN Computer Corporation, 2001-2002. No part of this manual may be reproduced or translated without prior written consent from TYAN Computer Corp. All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following. TYAN, Trinity i845DDR S2095 are trademarks of TYAN Computer Corporation. [. . . ] Adjusts the system date. System Time System Date 3. 2 Advanced BIOS Features Options related to the IO interface can be altered through the following. Virus Warning CPU L1 & L2 Cache Quick Power On Self Test First, Second, Third, Other Boot Device Swap Floppy Drive Boot Up Floppy Seek Boot Up NumLock Status Gate A20 Option Typematic Rate Setting Typematic Rate (chars/Sec ) Typematic Delay (MSec) Security Option OS Select for DRAM > 64MB Small Logo(EPA) Show Setup System Non-OS2 OS2 Enabled Disabled Disabled Auto Enabled Disabled Enabled Disabled Options Dependant on system. Enabled Disabled Enabled Disabled On Off Enabled Disabled Enabled Disabled 6 , 8, 10, 12, 15, 20, 24, 30 This settings toggles virus protection on or off for boot sector writes. Toggles the use of CPU L1 and L2 cache This option allows the system to skip self tests for faster startup. Defines how many characters are repeated per second when holding down a key on the keyboard. Defines the delay that occurs at key stroke before that key will start to repeat. Sets the password on either just the BIOS setup or the entire system (BIOS setup included). Select OS2 only if you are running OS/2 operating system with more than 64MB of RAM. Toggles the display of the EPA Energy Star logo at POST. 250 , 500, 750, 1000 22 http://www. tyan. com 3. 3 Advanced Chipset Features Options related to the chipset features can be altered through the following. DRAM Timing Selectable DRAM Read Thermal Mgmt System BIOS Cacheable Video BIOS Cacheable Video RAM Cacheable Memory Hole At 15M-16M Manual SPD Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled 4, 8, 16, 32, 64, 128, 256 4, 8, 16, 32 Leave as Default. Creates a memory reserve at 15 to 16MB address in RAM for ISA devices that require it. Leave as Default. Delayed Transaction AGP Aperture Size (MB) Delay Prior to Thermal 3. 4 Integrated Peripherals Options related to integrated peripheral features can be altered through the following. OnChip IDE Channel0 OnChip IDE Channel1 IDE Prefetch Mode Primary/Secondary Master/Slave PIO Prim ary/Secondary Master/Slave UDMA Super IO Device Init Display First OnChip USB Controller USB Keyboard Support IDE HDD Block Mode Enabled Disabled Enabled Disabled Enabled Disabled Auto PIO 1, 2, 3, 4 Auto UDMA 1, 2, 3, 4 , 5 Press Enter PCI Slot AGP Slot All Enabled None Enabled Disabled Enabled Disabled Enables/Disables IDE controller 0. Leave this setting as is. 23 http://www. tyan. com Serial Port 1, 2 Serial 2 Mode Serial Base I/O Enabled Disabled Auto Enabled Disabled 3F8, 2F8 3E8, 2E8 IRQ3 IRQ4 Toggles use of serial ports A and or B. Enabling ports also requires you to enter the I/O address for that port unless you select Auto. Recommended config: 2F8 & IRQ3 3F8 & IRQ4 Enabled requires manual input of port parameters. Two-way protocol Enhanced Parallel Port may provide higher bandwidth if an EPP compliant device is used (e. g. Enhanced Compatibility Port may provide higher bandwidth if an ECP compliant device is used (e. g. (optional feature) Serial Interrupt Parallel Port Enabled Disabled Auto Output Only Bi-directional EPP Parallel Port Mode ECP Parallel Address Parallel IRQ ECP DMA Channel Game Port Address MIDI Port Address MIDI Port IRQ 378 278 3BC IRQ5 IRQ7 DMA1 DMA2 201 330 10 24 http://www. tyan. com 3. 5 Power Management Setup Options related to power management can be altered through the following. ACPI function ACPI Suspend Type Power Management Option HDD Power Down Suspend Mode Video Off Option Video Off Method Soft-Off by PWRBTN PWRON After PWR-Fail IEQ/Event Activity Detect VGA LPT & COM HDD & FDD PCI Master Power On by PCI Card Modem Ring Resume RTC Alarm Resume IRQs Activity Monitoring 3. 6 PCI Configuration Rest Configuration data Default: Disabled Resources Controller by Default: Auto(ESCD) PCI/VGA Palette Snoop Default: Enabled Enabled Disabled Auto(ESCD) Manual Enabled Disabled Leave as Default. Enabled Disabled S1 (POS) User Define Maximum Saving Minimum Saving Disabled 1, 5, 10, 20, 30, 45, 60 minutes Disabled Standby Sleep Suspend -> Off Standby V/H SYNC+Blank Blank Off Instant-Off 4-seconds Off On Press Enter Off On LPT/COM LPT COM On Off On Off Disabled Enabled Disabled Enabled Disabled Enabled Press Enter Toggles advanced power and configuration done by OS. Defines whether the system will remain off if power fails or turn on when power is restored. Defines whether the device will remain active if system enters Suspend mode. Defines whether the system can be powered on by a PCI Card. [. . . ] Standby mode: in this mode, the video and hard drives shut down; all other devices continue to operate normally. Striping: see RAID UltraDMA-33/66/100: a fast version of the old DMA channel. Without proper UltraDMA controller, your system cannot take advantage of higher data transfer rates of the new UltraDMA/UltraATA hard drives. This one port type can function as a serial, parallel, mouse, keyboard or joystick port. [. . . ]