User manual WACOM BAMBOO FUN

[. . . ] Contents Index 1 User's manual for Windows & Macintosh ® ® Using a pen Customizing your pen Troubleshooting Using a tablet Customizing your tablet Digital inking Using a cordless mouse Customizing your cordless mouse Contents Index 1 Contents Index 2 BambooTM Fun User's Manual for Windows® & Macintosh® English version 1. 0, April 03, 2007 Copyright © Wacom Company, Limited, 2007 All rights reserved. No part of this manual may be reproduced except for your express personal use. Wacom reserves the right to revise this publication without obligation to provide notification of such changes. Wacom does its best to provide current and accurate information in this manual. [. . . ] If not: · Make sure the tablet USB cable is securely connected to the tablet and to an active USB port on your computer. · If you are connecting the tablet to a USB hub (or hub device such as a keyboard with USB ports), be sure the USB hub is properly connected to your computer and is active. · Connect the tablet to a different USB port or try connecting to the USB port on another computer. · If the tablet status ring does not illuminate after your computer is on and has finished booting up, your USB port may be disabled. Now press both the upper left and lower right ExpressKeys and hold them down for three (3) seconds. The tablet status ring should glow at a brighter level each time you press a key. The tablet status ring should glow at a brighter level when you touch the ring. · Check the pen by first opening the Pen Tablet control panel and selecting the PEN tab. Click on the DEFAULT button to return the pen to its default settings. The tablet status ring should glow brightly each time the tip or eraser makes contact with the tablet surface. Without applying pressure to the pen tip, hold the pen tip within approximately 5 mm (0. 20 inch) of the tablet surface and press each pen button in turn. The tablet status ring should glow brightly each time a pen button is pressed. While within proximity, but without touching the tablet surface, move your pen across the active area of the tablet. The screen cursor should move in the corresponding direction on your monitor or display screen. Contents Index 37 Contents Index 38 Check the cordless mouse by opening the Pen Tablet control panel and selecting the MOUSE tab. Click on the DEFAULT button to return the mouse to its default settings. Move the cordless mouse across the active area of the tablet; the screen cursor should move in the corresponding direction on your monitor. The tablet status ring should glow brightly each time a button is pressed. When done, exit the diagnostics mode by pressing both the upper left and lower right ExpressKeys and holding them down for three (3) seconds. In the Pen Tablet control panel, select the TABLET tab and use the pull-down menus to return the ExpressKeys to their previous settings. · Move your finger in a clockwise direction along the Touch Ring to zoom in on the image. · Move your finger in a counterclockwise direction along the Touch Ring to zoom out of the image. For Windows Vista, Microsoft Journal should launch if the application is available. [. . . ] The relationship between your Bamboo Fun tool position on the tablet and the cursor position on the monitor screen. Modifier keys include SHIFT, ALT, and CTRL for Windows, or SHIFT, CONTROL, COMMAND, and OPTION for Macintosh. A setting that allows you to adjust the screen cursor acceleration when your Bamboo Fun tool is in mouse mode. When you place a Bamboo Fun tool on the tablet, you can move the screen cursor with a "pick up and slide" motion similar to using a traditional mouse. [. . . ]