User manual X10 AM12E DATASHEET

[. . . ] Appliance Module 230VAC - 50 Hz - 500W LOAD RATING Key Features · On/Off function to control fluorescent or low energy lamps, air conditioner, fan, coffee pot, etc . [. . . ] The switch plug-in module can switch incandescent lamps and low energy lamps up to 500W, appliances with electric motors up to 250W or halogen floor lamps with foot dimmer up to 500 W (refer also to "technical data"). As the X10 switch is simply inserted into wall outlets like an ordinary plug, there is no installation necessary. Just adjust the settings on the front side to the desired device address (e. g. The load connected to the switch module can still be controlled locally by its own switch, but do not forget to leave the local switch in the "ON" position, otherwise the load cannot be controlled by an X10 controller. [. . . ] Or alternatively, by individual unit control using "On" and "Off". Technical data · Supply voltage: 230V ±10% 50 Hz · Supply current : 20 mA capacitive · Making capacity: · 500W (incandescent lamps only) · 1 A (motors) · 16 A (resistive loads) · EMC emission: according to EN 50081-1 · EMC immunity: according to EN 50082-1 · Electrical safety: according to EN 60950 and EN 60065 · Signal sensitivity: 15 mVpp min 50 mVpp max at 120 kHz · Input impedance: 180W (L - N) at 120 kHz · Ambient temperature: - 10° C to + 50° C (operation) - 20° C to + 70° C (storage) · Dimensions: 52 x 122 x 33 mm (width x height x depth without plug) [. . . ]