User manual X10 AW10E DATASHEET

[. . . ] Wall-Mounted Switch 230VAC - 50 Hz - 10A LOAD RATING Key Features · Replaces any normal switch for X10 control of lighting (including fluorescent lighting) or appliances such as heater/fans, etc. [. . . ] The wall-mounted light switch simply replaces the normal light switch and is mounted into a flush box. It can also be controlled by external momentary action switches connected to terminal 2. The AW10E responds to STANDARD X10 protocols: "All units off" from any X10 controller set to its house code, regardless of unit code. Or alternatively individual by unit controller using "On" and "Off". The unit is supplied with cover plate JUNG CD 500 and mounting frame. Technical data · Supply voltage: 230V +10% -15% 50 Hz · Power consumption:< 2, 5W · Supply current: 20 mA capacitive · Making capacity: 2000W (incandescent lamps only) 10 A (resistive load) · EMC emission: according to EN 50081-1 · EMC immunity: according to EN 50082-1 · Electrical safety: according to EN 60950 and EN 60065 · Signal sensitivity:15 mVpp min. at 120 kHz · Input impedance: 180 (L - N) at 120 kHz · Connections: screw type terminals for phase, neutral, switched phase, control 2. [. . . ] · Ambient temperature: - 10° C to + 50° C (operation) - 20° C to + 70° C (storage) · Available in Schuko form [. . . ]