User manual X10 FD10 DATASHEET

[. . . ] DIN Filter Coupler 230VAC 50 Hz - 63A Key Features · Installed at the breaker panel/fuse box, prevents X10 signals from leaving / entering the home. [. . . ] In addition there are wireless intercommunication systems which use mains borne signaling. These disturbances are usually carried into the house network from outside, e. g. Remaining interferences generated within the house network are without significance as the special dynamic filtering techniques of the X10 system ensure undisturbed performance. The FD10 also includes the ability to couple X10 signals across phases. For installation with three phases, use three FD10 filters and couple the filters by connecting their terminals K to the next phase, respectively. Technical data · Supply voltage: 230 V +10% -15% 50 Hz · Maximum current: 63 A · Filter centre frequency: 120 kHz · Filter band width: 5 kHz min. at zero current -15 dB min. at 63 A · Reverse attenuation: 15 dB min. [. . . ] at 120 kHz · Connections: screw type terminals for phase (supply), phase (house), neutral, coupling · Ambient temperature: - 10° C to + 40° C (operation) - 20° C to + 70° C (storage) [. . . ]