User manual X10 UX17A

[. . . ] Set up the FireCracker (sold separately) following the instructions that came with it. Download the X10 IR Commander program from: http://www. x10. com/commander. htm 3. [. . . ] Point the 3 LEDs on the IR Extender towards the front of the A/V components you want to control. When you first power on (or after you press the Learn button) the UX17A is put into learn mode. You will then be able to control your A/V equipment from the X10 IR Commander software. You can also teach it a House and Unit Code for a HawkEye Motion Detector and will then be able to turn on your VCR when the HawkEye motion detector is tripped by someone walking into the room. The LED flashes once per second. TM Model UX17A FCC Approved The UX17A Whole-House RF to IR converter works with the Firecracker Computer Interface. The UX17A converts the RF commands to IR commands to control your TV, VCR, DVD player, etc. You set up the X10 Commander software to send the commands for your particular brands of TV, VCR, etc. You can then control all your Audio/Video products anywhere in your home at the click of a button from your PC. 2. Select a Housecode from the IR Commander software and press enter (within 30 seconds). Now when you click on a button on the X10 IR Commander screen on your PC, the FireCracker sends RF commands to the UX17A which converts them to IR commands to control your TV, VCR, DVD player, etc. [. . . ] agrees to repair or replace, at it's sole discretion, a defective X10 product if returned to X10 (USA) Inc. If service is required under this warranty: Call 1-800-675-3044 or e-mail sales@x10. com for details on how to return your unit(s). Antenna AC Adapter Learn button IR Extender Jack 3 LEDs X10 (USA) Inc. [. . . ]