User manual ZIBRO A20

[. . . ] Place the air purifier near or on the ground to enable it to filter large dust particles such as pollen. The installation must be completely in accordance with local regulations, ordinances and standards. You may absolutely not connect the device if the power supply is not earthed. [. . . ] Remove the front panel 1 with the aid of the fastening mechanism 5 on both sides of the device. Attach the front panel by pushing the three hooks on the top into the recesses in the device. The HEPA filter must be inserted correctly in order to guarantee that it will function correctly. The A20 air purifier is equipped with a 3 layer filter package to clean the circulated room air. The HEPA filter and activated carbon filter continue to work for a long period of time after opening. The frequency of use and operating conditions determine how often a filter must be replaced. Remove the front panel 1 with the aid of the fastening mechanism E on both sides of the device. Next to the filter you will see a sticker printed with a small grey and brown square. If the filter is one of these colours, replace it in the matter described in chapter B. Install the new HEPA / active carbon filter (see chapter B) and close the front panel. The dirty filter can be disposed with the household waste (not biologically degradable waste) without any problem. - Regardless of the frequency of use, we recommend replacing the HEPA filter with a new filter at least once per season. The appropriate light ­ LO (low) or HI (high) ­ will then switch on. Switch the device off by moving the ON/OFF switch to the OFF position. [. . . ] The warranty does not cover damage caused by actions that deviate from those as described in the user's manual or by neglect. Shipment costs and the risks associated with the shipment of the air purifier or parts of the air purifier are always borne by the purchaser. To prevent unnecessary expenses, we recommend that you always carefully read the user's manual first. [. . . ]