User manual ZIBRO D4

[. . . ] `Full water tank' Air inlet ´ Removable water tank ² ¶ º ¾ µ Dry air outlet Lift-slot DC power socket Rubber feet AC/DC switching mode power supply (adapter) ¸ ¹ DC power jack AC plug with power cord Water displacement hole Float switch Congratulations on the purchase of your Zibro mini-dehumidifier. You have acquired a high quality product that will provide you with many years of pleasure, on condition that you use it responsibly. The Zibro mini-dehumidifier uses Peltier technology (no compressor) which makes it light and quiet. The Zibro eliminates this problem by keeping them free of unwanted moisture. [. . . ] Always remove the plug from the electric power supply before cleaning or replacing the unit or components of the unit. Never use an extension cable to connect the device to the electric power supply. For safety reasons take care when children are in the surrounding of the device, as with any other electrical device. Have any repairs only carried out by a recognised service engineer or your supplier. Follow the instructions for use and maintenance as indicated in the user manual of this device. Always remove the plug of the unit from the wall socket when it is not in use. A damaged power cord or plug must always be replaced by a recognised electrician or your supplier. Never use the device with a damaged power cord, plug, cabinet or control panel. Never trap the power cord or allow it to come into contact with sharp edges. ⷠFailing to follow the instructions may lead to nullification of the guarantee on this device. Avoid using the AC/DC switching mode power supply in wet or damp place, and position it in areas where the air ventilation is good. If the unit has been properly connected and no power is flowing, have the AC/DC switching mode power supply checked by a qualified electrician to ensure that the fuses inside the switching mode power supply are not faulty. The thumb should be placed at the top centre of the unit while lifting by the lift-slot (7), to avoid tilting. At the same time, the other hand should be holding the base to secure the unit. Do not use the dehumidifier in combination with an other power source then the one enclosed, to prevent damage to the unit and dangerous situations. Any repair work must be done by qualified technician appointed by our distributors. Specifications are subject to change for improvement without prior notice. AC/DC switching mode power supply (220/240 V / 13V) 2 Plug the DC power jack (11) of the switching mode power supply to the DC power socket (8), then connect the AC plug (12) of the switching mode power supply to the appropriate main socket. [. . . ] The warranty does not cover damage caused by actions that deviate from those as described in the user's manual or by neglect. Transportation costs and the risks involved during the transportation of the dehumidifier or components shall always be for the account of the purchaser. To prevent unnecessary expenses, we recommend that you always carefully read the user's manual first. If this does not provide a solution, take the dehumidifier to your distributor for repair. [. . . ]