User manual ZONET ZEW1542

[. . . ] Use Zero Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 18 Chapter 6. Soft AP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 22 6. 1 Start Soft AP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 22 6. 2 Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 23 6. 3 Access Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 24 6. 4 MAC Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 25 6. 5 Switch to Working Station Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 25 Chapter 7. Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 26 Chapter 8. TroubleShooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 27 802. 11n Wireless CardBus Chapter 1 Introduction 1. 1 Welcome ZEW1542 connects you with IEEE802. 11n(Draft 2. 0) networks at receiving rate up to an incredible 300Mbps! [. . . ] Authentication: Open, Shared, (Leap), WPA-PSK, WPA2-PSK, WPA and WPA2 2. Encryption: Algorithm used in BSS or IBSS, WEP, TKIP, AES, and None 3. 802. 1x configuration: It is an advanced encryption mode based on Radius server or authentication credentials. 9 802. 11n Wireless CardBus c. Authentication Type: The type selected here must be identical to the type of the 802. 1x authentication type you're using. This field will be grayed out when authentication type is not EAP-FAST. Use Client: If the authentication type is using PEAP or TTLS, you can use the certificate stored on your computer. If the authentication type is using TLS/Smart Card, this box is always checked. Allow unauthenticated provision mode: This box is always checked and can not be modified. Use protected authentication credential: If the authentication type is using EAP-FAST, you can use protected authentication credential by check this box. Import: Import the authentication credential file (PAC or al file format), you'll be prompted to select a credential file from your computer. This pull-down menu is only available when authentication type is using PEAP or TTLS. When using EAP-FAST as authentication type, the protocol setting is always Generic Token Card and can not be changed. Password Mode: Select the password mode of EAP-FAST authentication mode. This setting is hidden when the authentication type is not EAP-FAST. 10 802. 11n Wireless CardBus 4. 2 Link Status Link status page shows detail information about the current connection. 1. If there's no active connection currently, "Disconnected" will be displayed. Link Quality: Based on signal strength and TX/RX packet error rate (%) 5. Transmit: Link Speed: Shows current transmitting rate (Mbps) Throughput: Shows current transmitting throughput (Kbps) 8. Receive: Link Speed: Shows current receiving rate (Mbps) Throughput: Shows current receiving throughput (Kbps) 11 802. 11n Wireless CardBus 4. 3 Site Survey Under Site Survey tab, you will know information of all surrounding wireless networks from the last scan. Information: Display the information about WPS IE on the selected network, list including Authentication Type, Encryption Type, Config Methods, Device Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF Bands PIN Code: 8-digit numbers. Config Mode: Enrollee or external Registrar Detail: Information about Security and Key in the credential. Disconnect: Stop WPS action and disconnect this active link. 16 802. 11n Wireless CardBus 10. PIN: Start to add to AP using PIN configuration method PBC: Start to add to AP using PBC configuration method Note: When clicking PIN or PBC button, please don't click Rescan within two-minute. [. . . ] Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and Ethernet cables are firmly connected. Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network. In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings for the wireless clients and access points. [. . . ]